With these, you may need to remove hp photosmart 7520 driver some metal covers to give access to your motherboard’s ports. The motherboard will be inside an anti-static bag and resting on top of anti-static foam. Slide the motherboard out of the bag, but leave it attached to the foam for now. Place the motherboard and foam on top of the anti-static bag, and take out the metal blanking plate.
Their job is to hold the motherboard off the bottom of the case, so it isn’t shorted out when its contacts touch the metal. The risers simply screw into the pre-drilled holes in the case. Use as many risers as there are screw holes in the motherboard, making sure that you screw them tightly into position with your fingers. Next, you need to see where the screw holes for the motherboard will go. Lie the case flat on the desk and make sure that all the internal cables are out of the way.
It should, however, clip into place and remain stable without any support. From the inside of the case, you need to take the blanking plate and push it into the gap at the rear of the case. Remember to align it so that it’s the same way up as when you measured it against your motherboard. Make sure that you bend it far enough for the motherboard’s port to be given enough clearance to pass underneath. The easiest way to see is to hold the blanking plate up to the motherboard until the cutouts match the ports on your board.
The blanking plate should be pushed against the motherboard with the ridge pointing out, so any text is readable. It will only fit one way, so maneuver it until it’s the right way. The blanking plate fits into the case, and gives you access only to the ports that your motherboard has. However, some motherboard manufacturers use generic blanking plates that fit their entire range of boards.
Ensuring Your New Gpu Can Be Supported By Your System
The motherboard is the backbone of your entire PC, connected to every other component, so it’s vital that you get things right now to avoid trouble further down the line. Don’t use the motherboard website unless you really need to when something isn’t working. The ASUS site only gives me options to download for various Windows OS, DOS and "other" (in .ROM format).
- It’s because all those drivers were in the CD you don’t have anymore.
- When looking for a driver, I do not recommend downloading them from driver sites, they might not be safe and contain malware.
- Find the vendor’s name, then go to the manufacturer site directly.
The ridge around the outside of the plate should clip into the hole. Be warned that this can be really fiddly and the blanking plates don’t always fit perfectly.
Can I install motherboard drivers without CD?
If you do not have a CD, you will have to download and install the software by searching Google from your motherboard version number. Note: From here, you must download these four softwares: Audio, VGA, Chipset, and LAN.
When you’ve got a clear case, take the motherboard off its foam backing and slide it gently into the case. Make sure that its rear ports are pushed up against the blanking plate correctly. Take a note of where the screw holes in the motherboard go, and remove the board.